You are watching: 1999 dodge ram 1500 water pump replacement
On a scale of 1 to 10 (10 gift the most difficult), how hard is that to change the water pump ~ above a 1999 ram 1500 5.9 liter engine? I"ve watched youtube videos and one suggests it"s a item of cake while another has girlfriend loosening the alternator, strength steering fluid reservoir, lifting the radiator, etc. Etc. Etc. And also stating it"s a 5-6 hour job.
Not that hard to do, just remember to obtain a pan clutch wrench at the auto keep (usually a rental), renders it a that lot eaiser
You yes, really don"t need to remove all that. Every you need to do is obtain the fan, shroud, belt removed and also its best there.
Keep that Mopar, purchase Mopar Parts.
See more: Do You Know How To Say Pretty In Arabic, How Do You Say 'Pretty Woman' In Arabic
I am fully disgusted every time ns think about having to take a distributor lid off of one of these trucks -Screamintrashcan
Loosening things up that share the exact same belt provides it simpler to gain the belt turn off and earlier on. If its a single serpentine belt setup, no need to do that due to the fact that you can just crank the tensioner out of the way.Removing the pan usually requires locking down the fan-clutch and also you carry out it one of two people by borrowing a tool made for it or some various other means. As soon as the pan is out of your means take turn off the pan shroud, just makes it simpler to the pump.Its a messy job, therefore make certain you have drip pans/bucket available. Also change out the thermostat and flush the entire system (heater too) if you"re at it. Simply a good idea.How about stopping into the Newbie area and also introducing yourself.
Brian: "A veteran - whether active duty, retired, national guard, or make reservation - is someone who, at one point in his or she life, wrote a blank check do payable come The "United claims of America", because that an quantity of "up to and including mine life.""
Loosening things up that share the very same belt renders it much easier to gain the belt turn off and earlier on. If that is a solitary serpentine belt setup, no should do that because you can just crank the tensioner the end of the way.Removing the fan usually involves locking down the fan-clutch and also you perform it one of two people by get loan a tool made for it or some various other means. When the pan is out of your way take turn off the pan shroud, simply makes it much easier to the pump.Its a messy job, for this reason make sure you have actually drip pans/bucket available. Also change out the thermostat and also flush the whole system (heater too) when you"re at it. Just a an excellent idea.How about stopping right into the Newbie area and also introducing yourself.
^^^ just one much more thing to add to this replace the bypass hose, entails lifting the AC comp. Look at worse 보다 it actually is. Will save you down the road.
I walk this newly on my 01 Dodge and also it was rather a project...if girlfriend cant get the pan clutch to different from her water pump you"re screwd and stranded...i couldnt gain mine off and also i had to remove it an have it torched off and also had to change the fan clutch...i would say the most frustrating was acquiring the plastic fan shroud off as well as making sure the gasket to be stuck on the new water pump....make sure you really clean turn off the block wherein the new water pump associate too...no seal = ns of coolant good luck
Continue with Google